HP 6125XLG - Display Ospf Peer Statistics

86
Area: 0.0.0.0
Router ID Address Pri Dead-Time Interface State
1.1.1.2 1.1.1.2 1 40 Vlan11 Full/DR
Table 24 Command output
Field Descri
p
tion
Area Neighbor area.
Router ID Neighbor router ID.
Address Neighbor interface address.
Pri Neighboring router priority.
Dead-Time Dead interval remained.
Interface Interface connected to the neighbor.
State
Neighbor state: Down, Init, Attempt, 2-Way, Exstart, Exchange,
Loading, or Full.
display ospf peer statistics
Use display ospf peer statistics to display OSPF neighbor statistics.
Syntax
display ospf [ process-id ] peer statistics
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
Usage guidelines
If no OSPF process is specified, this command displays OSPF neighbor statistics for all OSPF processes.
Examples
# Display OSPF neighbor statistics.
<Sysname> display ospf peer statistics
OSPF Process 1 with Router ID 10.3.1.1
Neighbor Statistics
Area ID Down Attempt Init 2-Way ExStart Exchange Loading Full Total
0.0.0.0 0 0 0 0 0 0 0 1 1
0.0.0.2 0 0 0 0 0 0 0 1 1
Total 0 0 0 0 0 0 0 2 2