443
Default
No next hop is set for IPv6 routes.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
ipv6-address: Specifies the next hop IPv6 address.
Usage guidelines
This command cannot set a next hop for redistributed routes.
Examples
# Configure node 10 for routing policy policy1 to set next hop 3ffe:506::1 for IPv6 routes matching AS
path list 1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match as-path 1
[Sysname-route-policy-policy1-10] apply ipv6 next-hop 3ffe:506::1
display ipv6 prefix-list
Use display ipv6 prefix-list to display IPv6 prefix list statistics.
Syntax
display ipv6 prefix-list [ prefix-list-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
prefix-list-name: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63 characters.
Without this argument, this command displays statistics for all IPv6 prefix lists.
Examples
# Display the statistics for all IPv6 prefix lists.
<Sysname> display ipv6 prefix-list
Prefix-list6: 666
Permitted 0
Denied 0
index: 10 permit 6::/64 ge 66 le 88
To Next Page
Loading...
