HP 6125XLG - Reset Ipv6 Prefix-List

446
Usage guidelines
An IPv6 prefix list can have multiple items, and each of them specifies a range of IPv6 prefixes. The
relation between items is logic OR. If a route passes an item, it passes the IPv6 prefix list.
If ipv6-address prefix-length is specified as :: 0, only the default route matches.
To match all routes, configure :: 0 less-equal 128 .
Examples
# Permit IPv6 addresses with a mask length between 32 bits and 64 bits.
<Sysname> system-view
[Sysname] ipv6 prefix-list abc permit :: 0 greater-equal 32 less-equal 64
# Deny IPv6 addresses with a prefix 3FFE:D00::/32 and a prefix length greater than or equal to 32 bits.
<Sysname> system-view
[Sysname] ipv6 prefix-list abc deny 3FFE:D00:: 32 less-equal 128
Related commands
• display ipv6 prefix-list
• reset ipv6 prefix-list
reset ipv6 prefix-list
Use reset ipv6 prefix-list to clear IPv6 prefix list statistics.
Syntax
reset ipv6 prefix-list [ prefix-list-name ]
Views
User view
Predefined user roles
network-admin
Parameters
prefix-list-name: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63 characters.
Without this argument, this command clears statistics for all IPv6 prefix lists.
Examples
# Clear the statistics for IPv6 prefix list abc.
<Sysname> reset ipv6 prefix-list abc
Related commands
• display ipv6 prefix-list
• ipv6 prefix-list