HP 6125XLG - Display Bgp Routing-Table Ipv6 Unicast Peer

246
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters. If no VPN is specified, the command displays BGP IPv6 unicast routing information matching
the specified BGP community list for the public network.
basic-community-list-number: Specifies a basic community list by its number in the range of 1 to 99.
comm-list-name: Specifies a community list by its name, a case-sensitive string of 1 to 63 characters.
whole-match: Displays routes exactly matching the specified community list. Without this keyword, this
command displays routes whose COMMUNITY attributes comprise the specified community list.
adv-community-list-number: Specifies an advanced community list by its number in the range of 100 to
199.
Usage guidelines
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display BGP IPv6 unicast routing information matching BGP community list 100.
<Sysname> display bgp routing-table ipv6 community-list 100
Total number of routes: 2
BGP local router ID is 192.168.1.136
Status codes: * - valid, > - best, d - dampened, h - history,
s - suppressed, S - stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
>e Network : 2:: PrefixLen : 64
NextHop : 1::2 LocPrf :
PrefVal : 0 OutLabel : NULL
MED :
Path/Ogn: 100i
>e Network : 3:: PrefixLen : 64
NextHop : 1::2 LocPrf :
PrefVal : 0 OutLabel : NULL
MED :
Path/Ogn: 100i
For command output, see Table 65.
Related commands
ip community-list
display bgp routing-table ipv6 unicast peer
Use display bgp routing-table ipv6 unicast peer to display BGP IPv6 unicast routing information
advertised to or received from the specified BGP peer.