HP 6125XLG - If-Match Tag; Ip As-Path

433
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match route-type internal
if-match tag
Use if-match tag to match routing information having the specified tag.
Use undo if-match tag to restore the default.
Syntax
if-match tag value
undo if-match tag
Default
No tag match criterion is configured.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
value: Specifies a tag in the range of 0 to 4294967295.
Examples
# Configure node 10 in permit mode for routing policy policy1 to match RIP, OSPF, and IS-IS routing
information having a tag of 8.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match tag 8
ip as-path
Use ip as-path to create an AS path list.
Use undo ip as-path to remove an AS path list.
Syntax
ip as-path as-path-number { deny | permit } regular-expression
undo ip as-path as-path-number [ regular-expression | deny | permit ]
Default
No AS path list is created.
Views
System view
Predefined user roles
network-admin