Restart t3 T3 timer, in seconds.
SA Bit
Whether SA is supported:
• Supported.
• Not supported.
Total number of interfaces Total number of IS-IS interfaces.
Number of waiting LSPs
Number of LSPs not obtained by the GR Restarter from
GR Helpers during LSDB synchronization.
display isis interface
Use display isis interface to display IS-IS interface information.
Syntax
display isis interface [ [ interface-type interface-number ] [ verbose ] | statistics ] [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Displays statistics of a specified IS-IS interface.
verbose: Displays detailed information about an interface. If this keyword is not specified, this command
displays brief information about an interface.
statistics: Displays IS-IS interface statistics.
process-id: Displays IS-IS interface information for an IS-IS process specified by its ID in the range of 1 to
65535.
Usage guidelines
If no interface is specified, the command displays information about all interfaces.
If no IS-IS process is specified, the command displays all interface information for all processes.
Examples
# Display brief IS-IS interface information.
<Sysname> display isis interface
Interface information for IS-IS(1)
----------------------------------
Interface: Vlan-interface12
Id IPv4.State IPv6.State MTU Type DIS
001 Up Down 547 L1/L2 Yes/No
# Display detailed IS-IS interface information.
To Next Page
Loading...
