Sum-Net Number of Type-3 LSAs originated.
Sum-Asbr Number of Type-4 LSAs originated.
External Number of Type-5 LSAs originated.
NSSA Number of Type-7 LSAs originated.
Opq-Link Number of Type-9 LSAs originated.
Opq-Area Number of Type-10 LSAs originated.
Opq-As Number of Type-11 LSAs originated.
LSA originated Number of LSAs originated.
LSA Received Number of LSAs received.
Routing Table Routing table information.
Intra Area Intra-area route number.
Inter Area Inter-area route number.
ASE ASE route number.
display ospf error
Use display ospf error to display OSPF error information.
Syntax
display ospf [ process-id ] error
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
Usage guidelines
If no process is specified, this command displays OSPF error information for all OSPF processes.
Examples
# Display OSPF error information.
<Sysname> display ospf error
OSPF Process 1 with Router ID 192.168.1.112
OSPF Packet Error Statistics
0 : OSPF Router ID confusion 0 : OSPF bad packet
0 : OSPF bad version 0 : OSPF bad checksum
0 : OSPF bad area ID 0 : OSPF drop on unnumbered interface
To Next Page
Loading...
