413
Policy Name Interface Name
pr01 Vlan-interface11
Table 96 Command output
Field Description
policy Name Policy name.
Interface Name Interface where the policy is applied.
Related commands
ipv6 policy-based-route (interface view)
if-match acl
Use if-match acl to configure an ACL match criterion.
Use undo if-match acl to remove the ACL match criterion.
Syntax
if-match acl acl-number
undo if-match acl
Default
No ACL match criterion is configured.
Views
IPv6 policy node view
Predefined user roles
network-admin
Parameters
acl-number: Specifies an ACL by its number in the range of 2000 to 3999. The number range of a basic
ACL is 2000 to 2999 and that of an advanced ACL is 3000 to 3999.
Examples
# Configure Node 10 of policy aa to permit the packets matching ACL 2000.
<Sysname> system-view
[Sysname] ipv6 policy-based-route aa permit node 10
[Sysname-pbr6-aa-10] if-match acl 2000
ipv6 policy-based-route (interface view)
Use ipv6 policy-based-route to configure IPv6 interface PBR by applying an IPv6 policy to an interface.
Use undo ipv6 policy-based-route to remove the configuration.
Syntax
ipv6 policy-based-route policy-name
undo ipv6 policy-based-route
To Next Page
Loading...
