353
display ospfv3 abr-asbr
Use display ospfv3 abr-asbr to display information about the routes to OSPFv3 ABR and ASBR.
Syntax
display ospfv3 [ process-id ] abr-asbr
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If no OSPFv3 process ID
is specified, this command displays information about all the routes to the OSPFv3 ABR and ASBR.
Examples
# Display information about all the routes to the OSPFv3 ABR and ASBR.
<Sysname> display ospfv3 abr-asbr
OSPFv3 Process 1 with Router ID 1.1.1.1
Destination :1.1.1.2 Rtr Type : ABR
Area :0.0.0.0 Path Type: Intra
NextHop :FE80:1:1::1 Cost : 1
Destination :1.1.1.3 Rtr Type : ASBR
Area :0.0.0.0 Path Type: Intra
NextHop :FE80:2:1::1 Cost : 1
Table 76 Command output
Field Descri
OSPFv3 Process 1 with Router ID 1.1.1.1 OSPFv3 process is 1, and router ID is 1.1.1.1.
Destination Router ID of an ABR or ASBR.
Rtr Type Router type: ABR, or ASBR.
Area Area ID of the next hop.
Path Type
Type of the route to the ABR or ASBR:
• Intra—Intra-area route.
• Inter—Inter-area route.
NextHop Next hop address.
Cost Cost from the router to the ABR or ASBR.
To Next Page
Loading...
