Type
Type of the route to the ABR or ASBR:
• Intra—Intra-area route.
• Inter—Inter-area route.
Destination Router ID of an ABR/ASBR.
Area ID of the area of the next hop.
Cost Cost from the router to the ABR/ASBR.
Nexthop Next hop address.
RtType Router type: ABR or ASBR.
display ospf asbr-summary
Use display ospf asbr-summary to display information about the redistributed routes that are
summarized.
Syntax
display ospf [ process-id ] asbr-summary [ ip-address { mask | mask-length } ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
ip-address: Specifies an IP address in dotted decimal notation.
mask: Specifies the mask in dotted decimal notation.
mask-length: Specifies the mask length in the range of 0 to 32 bits.
Usage guidelines
If no OSPF process is specified, this command displays the summarized redistributed routes for all OSPF
processes.
If no IP address is specified, this command displays all summarized redistributed routes.
Examples
# Display information about all summarized redistributed routes.
<Sysname> display ospf asbr-summary
OSPF Process 1 with Router ID 2.2.2.2
Summary Addresses
Total Summary Address Count: 1
To Next Page
Loading...
