HP 6125XLG - Display Ip As-Path; Display Ip Community-List

425
Example
# Specify the next node 20 for node 10 of routing policy policy1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] continue 20
display ip as-path
Use display ip as-path to display BGP AS path list information.
Syntax
display ip as-path [ as-path-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
as-path-number: Specifies an AS path list by its number in the range of 1 to 256. Without this argument,
the command displays information about all BGP AS path lists.
Examples
# Display information about BGP AS path list 1.
<Sysname> display ip as-path 1
ListID Mode Expression
1 permit 2
Table 97 Command output
Field Descri
p
tion
ListID AS path list ID.
Mode
Match mode:
• permit.
• deny.
Expression Regular expression used to match routes.
display ip community-list
Use display ip community-list to display BGP community list information.
Syntax
display ip community-list [ basic-community-list-number | adv-community-list-number | comm-list-name ]
Views
Any view