366
Area: 0.0.0.0
Interface Vlan-interface11
-------------------------------------------------------------------------
Nbr-ID 1.2.2.2 Retransmit List
Type LinkState ID AdvRouter SeqNum Age CkSum
0x2009 0.0.0.0 1.3.3.3 0x80000001 3600 0x49fb
Table 87 Command output
Field Descri
Area Area ID.
Interface Interface type and sequence number.
Nbr-ID Neighbor ID.
Retransmit List Retransmission list information.
Type LSA type.
AdvRouter Advertising router.
SeqNum LSA sequence number.
Age LSA age.
CkSum Checksum.
display ospfv3 routing
Use display ospfv3 routing to display OSPFv3 route information.
Syntax
display ospfv3 [ process-id ] routing [ ipv6-address prefix-length ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.
ipv6-address prefix-length: Specifies an IPv6 address. The ipv6-address argument specifies an IPv6 prefix.
The prefix-length argument specifies a prefix length in the range of 0 to 128.
Usage guidelines
If no process is specified, this command displays the OSPFv3 route information for all processes.
Examples
# Display OSPFv3 routing information.
<Sysname> display ospfv3 routing
OSPFv3 Process 1 with Router ID 1.1.1.1
To Next Page
Loading...
