HP 6125XLG - Display Route-Policy

427
Examples
# Display information about BGP extended community list 1.
<Sysname> display ip extcommunity-list 1
Extended Community List Number 1
permit rt : 9:6
Table 99 Command output
Field Descri
p
tion
Extended Community List
Number
Extended community list.
permit
Match mode:
• permit.
• deny.
rt Route Target (RT) extended community attribute.
display route-policy
Use display route-policy to display routing policy information.
Syntax
display route-policy [ route-policy-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63 characters.
Without this argument, this command displays information about all routing policies.
Examples
# Display information about routing policy 1.
<Sysname> display route-policy policy1
Route-policy: policy1
permit : 1
if-match cost 10
continue: next node 11
apply comm-list a delete
Table 100 Command output
Field Descri
p
tion
Route-policy Routing policy name.