tion
Proto Protocol that installed the route.
route Number of routes installed by the protocol.
active Number of active routes.
added
Number of routes added to the routing table after the router started up or the routing table was
last cleared.
deleted Number of routes marked as deleted, which will be cleared after a period.
Total Total number of routes.
display ipv6 routing-table
Use display ipv6 routing-table to display IPv6 routing table information.
Syntax
display ipv6 routing-table [ vpn-instance vpn-instance-name ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. Without this option, the command displays routing information for the public
network.
verbose: Displays detailed routing table information, including information about both active and
inactive routes. With this keyword absent, the command displays only brief information about active
routes.
Examples
# Display brief information about active routes in the IPv6 routing table.
<Sysname> display ipv6 routing-table
Destinations : 3 Routes : 3
Destination: ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: FE80::/10 Protocol : Direct
NextHop : :: Preference: 0
Interface : NULL0 Cost : 0
To Next Page
Loading...
