HP 6125XLG - Reset Bgp All; Reset Bgp Dampening Ipv4 Unicast

310
Related commands
• peer capability-advertise route-refresh
• peer keep-all-routes
reset bgp all
Use reset bgp all to reset all BGP sessions.
Syntax
reset bgp all
Views
User view
Predefined user roles
network-admin
Usage guidelines
To validate a new route selection policy, use this command to reset BGP sessions. BGP re-establishes the
BGP sessions, advertises routes, and applies the new policy to routes. This operation breaks down BGP
sessions for a short while.
Examples
# Reset all BGP sessions.
<Sysname> reset bgp all
reset bgp dampening ipv4 unicast
Use reset bgp dampening ipv4 unicast to clear BGP IPv4 unicast route dampening information and
release the suppressed BGP IPv4 unicast routes.
Syntax
reset bgp dampening ipv4 [ unicast ] [ vpn-instance vpn-instance-name ] [ network-address [ mask |
mask-length ] ]
Views
User view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters. If no VPN is specified, this command clears BGP IPv4 unicast route dampening information
for the public network, and releases the suppressed BGP IPv4 unicast routes.
network-address: Specifies a destination network address.
mask: Specifies a network mask, in dotted decimal notation.
mask-length: Specifies a mask length in the range of 0 to 32.