67
Parameters
description: Configures a description for the OSPF process in OSPF view, or for the OSPF area in OSPF
area view. The description argument specifies a string of 1 to 80 characters.
Usage guidelines
The description specified by this command is used to identify an OSPF process or area.
Examples
# Describe OSPF process 100 as abc.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] description abc
# Describe OSPF area 0 as bone area.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 0
[Sysname-ospf-100-area-0.0.0.0] description bone area
display ospf abr-asbr
Use display ospf abr-asbr to display routes to the ABR or ASBR.
Syntax
display ospf [ process-id ] abr-asbr
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
Usage guidelines
If no process ID is specified, this command displays routes to the ABR/ASBR for all OSPF processes.
If you use this command on routers in a stub area, the commands displays no ASBR information.
Examples
# Display information about routes to the ABR or ASBR.
<Sysname> display ospf abr-asbr
OSPF Process 1 with Router ID 192.168.1.2
Routing Table to ABR and ASBR
Type Destination Area Cost Nexthop RtType
Inter 3.3.3.3 0.0.0.0 3124 10.1.1.2 ASBR
Intra 2.2.2.2 0.0.0.0 1562 10.1.1.2 ABR
To Next Page
Loading...
