253
[Sysname-acl-adv-3000] rule 10 permit ip source 113.0.0.0 0 destination 255.255.0.0 0
[Sysname-acl-adv-3000] rule 100 deny ip
[Sysname-acl-adv-3000] quit
[Sysname] bgp 100
[Sysname-bgp] ipv4-family unicast
[Sysname-bgp-ipv4] filter-policy 3000 import
Related commands
• filter-policy export
• peer as-path-acl
• peer filter-policy
• peer prefix-list
• peer route-policy
graceful-restart
Use graceful-restart to enable BGP GR capability.
Use undo graceful-restart to disable BGP GR capability.
Syntax
graceful-restart
undo graceful-restart
Default
BGP GR capability is disabled.
Views
BGP view
Predefined user roles
network-admin
Usage guidelines
GR ensures continuous forwarding when BGP restarts or an active/standby switchover occurs.
BGP peers exchange Open messages containing GR information. If both parties have GR capability,
they establish a GR-capable session.
After you execute this command, the device reestablishes BGP sessions.
Examples
# Enable GR capability for BGP process 100.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] graceful-restart
Related commands
• graceful-restart timer restart
• graceful-restart timer wait-for-rib
To Next Page
Loading...
