EasyManua.ls Logo

HP 6125XLG - Peer Connect-Interface

HP 6125XLG
466 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
277
[Sysname-bgp] peer 1.1.1.1 capability-advertise suppress-4-byte-as
# In BGP-VPN instance view, enable 4-byte A S n u m b e r s u p p re s s i o n f o r p e e r 1.1.1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ip vpn-instance vpn1
[Sysname-bgp-vpn1] peer 1.1.1.1 as-number 200
[Sysname-bgp-vpn1] peer 1.1.1.1 capability-advertise suppress-4-byte-as
Related commands
• display bgp peer ipv4 unicast
• display bgp peer ipv6 unicast
peer connect-interface
Use peer connect-interface to specify a source interface (IP address/IPv6 address) for establishing TCP
connections to a peer or peer group.
Use undo peer connect-interface to restore the default.
Syntax
peer { group-name | ip-address | ipv6-address } connect-interface interface-type interface-number
undo peer { group-name | ip-address | ipv6-address } connect-interface
Default
BGP uses the output interface (IP address/IPv6 address) of the best route destined for the BGP peer or
peer group as the source interface for establishing a TCP connection to the peer or peer group.
Views
BGP view, BGP-VPN instance view
Predefined user roles
network-admin
Parameters
group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. The peer
group must have been created.
ip-address: Specifies a peer by its IP address. The peer must have been created.
ipv6-address: Specifies a peer by its IPv6 address. The peer must have been created.
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
If the peer's IP address/IPv6 address belongs to an interface indirectly connected to the local router,
specify that interface as the source interface for TCP connections on the peer. For example, interface A
on the local end is directly connected to interface B on the peer. When you execute the peer x.x.x.x
as-number as-number command on the local end to specify the BGP peer, and x.x.x.x is not the IP
address of interface B, use the peer connect-interface command on the peer to specify the interface
whose IP address is x.x.x.x as the source interface for establishing a TCP connection.

Table of Contents

Other manuals for HP 6125XLG

Related product manuals