LS UPD: LSA checksum bad LSU packets with wrong LSA checksum.
LS UPD: Received less recent LSA LSU packets without latest LSA.
LS UPD: Unknown LSA type LSU packets with unknown LSA type.
display ospf graceful-restart
Use display ospf graceful-restart to display GR information for an OSPF process.
Syntax
display ospf [ process-id ] graceful-restart [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
verbose: Displays detailed GR information.
Usage guidelines
If no process ID is specified, this command displays GR information for all processes.
Examples
# Display detailed GR information.
<Sysname> display ospf graceful-restart verbose
OSPF Process 1 with Router ID 1.1.1.1
Graceful Restart information
Graceful Restart capability : Enable(IETF)
Graceful Restart support : Planned and un-planned,Partial
Helper capability : Enable(IETF)
Helper support : Planned and un-planned(IETF),Strict LSA check
Current GR state : Normal
Graceful Restart period : 40 seconds
Number of neighbors under Helper: 0
Number of restarting neighbors : 0
Last Restarter exit reason : None
Last Helper exit reason : None
Area: 0.0.0.0
Authtype: None Area flag: Normal
Area up Interface count: 2
To Next Page
Loading...
