HP 6125XLG - Domain-Authentication-Mode

155
ISIS: 0 BGP: 0
RIP: 0 OSPF: 0
Total Number: 0
IPv6 Imported Routes:
Static: 0 Direct: 0
ISISv6: 0 BGP4+: 0
RIPng: 0 OSPFv3: 0
Total Number: 0
Lsp information:
LSP Source ID: No. of used LSPs
7777.8888.1111 001
Table 43 Command output
Field Descri
p
tion
Statistics information for ISIS(processid) Statistics for the IS-IS process.
Level-1 Statistics Level-1 statistics.
Level-2 Statistics Level-2 statistics.
Learnt routes information
Number of learned IPv4 routes.
Number of learned IPv6 routes.
Imported routes information
• IPv4 Imported Routes—Numbers of different types of
redistributed IPv4 routes.
• IPv6 Imported Routes—Numbers of different types of
redistributed IPv6 routes.
Lsp information
LSP information:
• LSP Source ID—ID of the source system.
• No. of used LSPs—Number of used LSPs.
domain-authentication-mode
Use domain-authentication-mode to specify the routing domain authentication mode and a password.
Use undo domain-authentication-mode to restore the default.
Syntax
domain-authentication-mode { md5 | simple | gca key-id { hmac-sha-1 | hmac-sha-224 |
hmac-sha-256 | hmac-sha-384 | hmac-sha-512 } } { cipher cipher-string | plain plain-string } [ ip | osi ]
undo domain-authentication-mode
Default
No routing domain authentication or password is configured.
Views
IS-IS view
Predefined user roles
network-admin