154
Usage guidelines
If no level is specified, this command displays both Level-1 and Level-2 routing information.
If no IS-IS process ID is specified, this command displays the statistics for all IS-IS processes.
Examples
# Display IS-IS statistics.
<Sysname> display isis statistics
Statistics information for ISIS(1)
----------------------------------
Level-1 Statistics
------------------
MTR(Basic-V4)
Learnt routes information:
Total IPv4 Learnt Routes in IPv4 Routing Table: 1
Total IPv6 Learnt Routes in IPv6 Routing Table: 0
Imported routes information:
IPv4 Imported Routes:
Static: 0 Direct: 0
ISIS: 0 BGP: 0
RIP: 0 OSPF: 0
Total Number: 0
IPv6 Imported Routes:
Static: 0 Direct: 0
ISISv6: 0 BGP4+: 0
RIPng: 0 OSPFv3: 0
Total Number: 0
Lsp information:
LSP Source ID: No. of used LSPs
7777.8888.1111 001
Level-2 Statistics
------------------
MTR(Basic-V4)
Learnt routes information:
Total IPv4 Learnt Routes in IPv4 Routing Table: 0
Total IPv6 Learnt Routes in IPv6 Routing Table: 0
Imported routes information:
IPv4 Imported Routes:
Static: 0 Direct: 0
To Next Page
Loading...
