412
Table 95 Command output
Field Description
Policy based routing information for
interface Vlan-interface11(failed)
IPv6 PBR configuration and statistics on VLAN-interface 11.
failed indicates the policy (including all its nodes) failed to be assigned
to the driver.
For a global interface (with only one-dimensional interface number, for
example, VLAN-interface 11), failed can be displayed only when you
specify the slot slot-number or chassis chassis-number slot slot-number
option for the command.
node 0 deny(not support)
node 2 permit(no resource)
Match mode of the node, permit or deny.
not support means the device does not support the match criteria
configured on the node. no resource means the device has insufficient
ACL resources, and failed to assign ACL resources to the node.
For a global interface (with only one-dimensional interface number, for
example, VLAN-interface 11), not support and no resource can be
displayed only when you specify the slot slot-number or chassis
chassis-number slot slot-number option for the command.
if-match acl Matches IPv6 packets against the IPv6 ACL.
apply next-hop Specify a next hop for permitted IPv6 packets.
Matched: 0 (no statistics resource)
Number of successful matches on the node (no statistics resource
indicates insufficient statistics resources).
For a global interface (with only one-dimensional interface number, for
example, VLAN-interface 11), no statistics resource can be displayed
only when you specify the slot slot-number or chassis chassis-number slot
slot-number option for the command.
Total matched Total number of successful matches on all nodes.
Related commands
reset ipv6 policy-based-route statistics
display ipv6 policy-based-route setup
Use display ipv6 policy-based-route setup to display IPv6 PBR configuration.
Syntax
display ipv6 policy-based-route setup
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display IPv6 PBR configuration.
<Sysname> display ipv6 policy-based-route setup
To Next Page
Loading...
