HP 6125XLG - If-Match Route-Type

432
Predefined user roles
network-admin
Parameters
preference: Specifies a local preference in the range of 0 to 4294967295.
Examples
# Create node 10 in permit mode for routing policy policy1 to match BGP routes having a local
preference of 2.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match preference 2
if-match route-type
Use if-match route-type to configure a route-type match criterion.
Use undo if-match route-type to remove the configuration.
Syntax
if-match route-type { external-type1 | external-type1or2 | external-type2 | internal | is-is-level-1 |
is-is-level-2 | nssa-external-type1 | nssa-external-type1or2 | nssa-external-type2 } *
undo if-match route-type [ external-type1 | external-type1or2 | external-type2 | internal | is-is-level-1
| is-is-level-2 | nssa-external-type1 | nssa-external-type1or2 | nssa-external-type2 ] *
Default
No route-type match criterion is configured.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
external-type1: Matches OSPF Type 1 external routes.
external-type1or2: Matches OSPF Type 1 and Type 2 external routes.
external-type2: Matches OSPF Type 2 external routes.
internal: Matches OSPF internal routes (including OSPF intra-area and inter-area routes).
is-is-level-1: Matches IS-IS Level-1 routes.
is-is-level-2: Matches IS-IS Level-2 routes.
nssa-external-type1: Matches OSPF NSSA Type 1 external routes.
nssa-external-type1or2: Matches OSPF NSSA Type 1 and 2 external routes.
nssa-external-type2: Matches OSPF NSSA Type 2 external routes.
Examples
# Configure node 10 in permit mode for routing policy policy1 to match OSPF internal routes.
<Sysname> system-view