AS-external-LSA Number of AS-external-LSAs.
Link-LSA Number of Link-LSAs.
Intra-Area-Prefix-LSA Number of Intra-Area-Prefix-LSAs.
Grace-LSA Number of Grace-LSAs.
Unknown-LSA Number of Unknown-LSAs.
Total Total number.
Routes Statistics Number of routes.
Intra Area Intra-area routes.
Inter Area Inter-area routes.
ASE/NSSA External routes.
display ospfv3 vlink
Use display ospfv3 vlink to display OSPFv3 virtual link information.
Syntax
display ospfv3 [ process-id ] vlink
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.
Usage guidelines
If no OSPFv3 process is specified, this command displays the OSPFv3 virtual link information for all
OSPFv3 processes.
Examples
# Display OSPFv3 virtual link information.
<Sysname> display ospfv3 vlink
OSPFv3 Process 1 with Router ID 1.1.1.1
Virtual-link Neighbor-id: 12.2.2.2, Neighbor-state: Full
Interface: 2348 (Vlan-interface12), Instance-ID: 0
Local IPv6 address: 3:3333::12
Remote IPv6 address: 2:2222::12
Cost: 1 State: P-2-P Type: Virtual
Transit area: 0.0.0.1
Timers: Hello 10, Dead 40, Retransmit 5, Transmit Delay 1
To Next Page
Loading...
