372
Using the filter-policy export command filters only routes redistributed by the import-route command. If
the import-route command is not configured to redistribute routes from other protocols and other OSPFv3
processes, use of the filter-policy export command does not take effect.
Examples
# Use IPv6 prefix list abc to filter redistributed routes.
<Sysname> system-view
[Sysname] ipv6 prefix-list abc permit 2002:1:: 64
[Sysname] ospfv3
[Sysname-ospfv3-1] filter-policy prefix-list abc export
# Configure IPv6 ACL 3000 to permit only route 2001::1/128. Use ACL 3000 to filter redistributed
routes.
<Sysname> system-view
[Sysname] acl ipv6 number 3000
[Sysname-acl6-adv-3000] rule 10 permit ipv6 source 2001::1 128 destination
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 128
[Sysname-acl6-adv-3000] rule 100 deny ipv6
[Sysname-acl6-adv-3000] quit
[Sysname] ospfv3
[Sysname-ospfv3-1] filter-policy 3000 export
filter-policy import (OSPFv3 view)
Use filter-policy import to configure OSPFv3 to filter routes calculated using received LSAs.
Use undo filter-policy import to restore the default.
Syntax
filter-policy { acl6-number [ gateway prefix-list-name ] | prefix-list prefix-list-name [ gateway
prefix-list-name ] | gateway prefix-list-name | route-policy route-policy-name } import
undo filter-policy import
Default
Routes calculated using received LSAs are not filtered.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
acl6-number: Specifies an IPv6 ACL by its number in the range of 2000 to 3999 to filter routes by
destination.
gateway prefix-list-name: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63
characters, to filter routes by next hop. Without this option, this command does not filter routes by next
hop.
prefix-list prefix-list-name: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63
characters, to filter routes by destination.
To Next Page
Loading...
