SOURCE System ID of the originating router.
NLPID Network layer protocol the originating router runs.
AREA ADDR Area address of the originating router.
INTF ADDR IP address of the originating router’s IS-IS interface.
INTF ADDR V6 IPv6 address of the originating router’s IS-ISv6 interface.
NBR ID Neighbor ID of the originating router.
IP-Internal Internal IP address and mask of the originating router.
IP-External External IP address and mask of the originating router.
IP-Extended Extended IP address and mask of the originating router.
COST Cost.
Auth Authentication information of the originating router.
IPV6 Internal IPv6 address and prefix of the originating router.
IPV6-Ext External IPv6 address and prefix of the originating router.
display isis name-table
Use display isis name-table to display the host name to system ID mapping table.
Syntax
display isis name-table [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Displays the host name to system ID mapping table for an IS-IS process specified by its ID in
the range of 1 to 65535.
Examples
# Configure a name RUTA for the local IS system.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] is-name RUTA
# Map the host name RUTB to the system ID 0000.0000.0041 of a remote IS.
[Sysname-isis-1] is-name map 0000.0000.0041 RUTB
# Display the IS-IS host name to system ID mapping table.
[Sysname-isis-1] display isis name-table
Name table information for ISIS(1)
---------------------------------------------------------------
To Next Page
Loading...
