HP 6125XLG - Graceful-Restart T1; Graceful-Restart T2

162
graceful-restart t1
Use graceful-restart t1 to configure the T1 timer.
Use undo graceful-restart t1 to restore the default.
Syntax
graceful-restart t1 seconds count count
undo graceful-restart t1
Default
The T1 timer is 3 seconds and can expire 10 times.
Views
IS-IS view
Predefined user roles
network-admin
Parameters
seconds: Specifies the T1 timer in the range of 3 to 10 seconds.
count: Specifies the number of times that the T1 timer can expire, in the range of 1 to 20.
Usage guidelines
The T1 timer specifies the number of times that GR Restarter can send a Restart TLV with the RR bit set.
After restart, the GR Restarter sends a Restart TLV with the RR bit set to its neighbor. If the restarting router
receives a Restart TLV with the RA set from its neighbor before the T1 timer expires, the GR process starts.
Otherwise, the GR process fails.
Examples
# Configure the T1 timer of IS-IS process 1 as 5 seconds, and the expiration times as 5.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] graceful-restart t1 5 count 5
Related commands
• graceful-restart
• graceful-restart t2
• graceful-restart t3
graceful-restart t2
Use graceful-restart t2 to configure the T2 timer.
Use undo graceful-restart t2 to restore the default.
Syntax
graceful-restart t2 seconds
undo graceful-restart t2