231
display bgp routing-table flap-info ipv6 unicast
Use display bgp routing-table flap-info ipv6 unicast to display BGP IPv6 unicast route flap statistics.
Syntax
display bgp routing-table flap-info ipv6 [ unicast ] [ vpn-instance vpn-instance-name ] [ network-address
[ network-address prefix-length | as-path-acl as-path-acl-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters. If no VPN is specified, the command displays BGP IPv6 unicast route flap statistics for the
public network.
network-address prefix-length: Specifies the destination network address and prefix length. The value
range for the prefix-length argument is 0 to 128.
as-path-acl as-path-acl-number: Specifies an AS path list by its number in the range of 1 to 256 to filter
BGP IPv6 unicast route flap statistics.
Usage guidelines
The command with the unicast keyword has the same effect as that without the unicast keyword.
When you execute the display bgp routing-table flap-info ipv6 unicast command without specifying any
argument, the command displays flap statistics of all BGP IPv6 unicast routes for the public network.
Examples
# Display BGP IPv6 unicast route flap statistics for the public network.
<Sysname> display bgp routing-table flap-info ipv6
Total number of routes: 2
BGP local router ID is 192.168.1.135
Status codes: * - valid, > - best, d - dampened, h - history,
s - suppressed, S - stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
de Network : 2:: PrefixLen : 64
From : 1::1 Flaps : 5
Duration: 00:03:25 Reuse : 00:39:28
Path/Ogn: 100i
To Next Page
Loading...
