Authtype
Authentication type of the area:
• None—No authentication.
• Simple—Simple authentication.
• MD5—MD5 authentication.
Area flag
Type of the area:
• Normal.
• Stub.
• StubNoSummary (totally stub area).
• NSSA.
• NSSANoSummary (totally NSSA area).
SPF scheduled Count SPF calculation count in the OSPF area.
Interface Interface in the area.
Cost Interface cost.
State Interface state.
Type Interface network type.
MTU Interface MTU.
Priority Router priority.
Timers
OSPF timers:
• Hello—Interval for sending hello packets.
• Dead—Interval within which the neighbor is down.
• Poll—Interval for sending hello packets.
• Retransmit—Interval for retransmitting LSAs.
FRR backup
Indicates whether Loop Free Alternate (LFA) calculation is
enabled on an interface.
display ospf cumulative
Use display ospf cumulative to display OSPF statistics.
Syntax
display ospf [ process-id ] cumulative
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
Usage guidelines
If no process is specified, this command displays statistics for all OSPF processes.
To Next Page
Loading...
