150
Examples
# Display redistributed IPv4 routing information.
<Sysname> display isis redistribute 1
Route information for IS-IS(1)
------------------------------
Level-1 IPv4 Redistribute Table
--------------------------------
Type IPv4 Destination IntCost ExtCost Tag State
--------------------------------------------------------------------------------
D 192.168.30.0/24 0 0 Active
D 11.11.11.11/32 0 0
D 10.10.10.0/24 0 0
Table 40 Command output
Field Descri
Route information for IS-IS(1) IS-IS process of the redistributed routing information.
Level-1 IPv4 Redistribute Table Redistributed IPv4 routing information of IS-IS Level-1.
Level-2 IPv4 Redistribute Table Redistributed IPv4 routing information of IS-IS Level-2.
Type
Redistributed route type:
• Direct.
• IS-IS.
• Static.
• OSPF.
• BGP.
• RIP.
IPV4 Destination IPv4 destination address.
IntCost Internal cost of the route.
ExtCost External cost of the route.
Tag Tag value.
State Indicates whether the route is valid.
display isis route
Use display isis route to display IS-IS IPv4 routing information.
Syntax
display isis route [ ipv4 [ ip-address mask-length ] ] [ [ level-1 | level-2 ] | verbose ] * [ process-id ]
Views
Any view
Predefined user roles
network-admin