HP 6125XLG - Display Ip Routing-Table Ip-Address

6
Protocol: Direct Process ID: 0
SubProtID: 0x0 Age: 04h20m37s
Cost: 0 Preference: 0
Tag: 0 State: Active NoAdv
OrigTblID: 0x0 OrigVrf: default-vrf
TableID: 0x2 OrigAs: 0
NBRID: 0x10000003 LastAs: 0
AttrID: 0xffffffff Neighbor: 0.0.0.0
Flags: 0x1008c OrigNextHop: 192.168.1.111
Label: NULL RealNextHop: 192.168.1.111
BkLabel: NULL BkNextHop: N/A
Tunnel ID: Invalid Interface: Vlan-interface21
BkTunnel ID: Invalid BkInterface: N/A
For command output, see Table 2.
display ip routing-table ip-address
Use display ip routing-table ip-address to display information about routes to a specific destination
address.
Use display ip routing-table ip-address1 to ip-address2 to display information about routes to a range of
destination addresses.
Syntax
display ip routing-table [ vpn-instance vpn-instance-name ] ip-address [ mask | mask-length ]
[ longer-match ] [ verbose ]
display ip routing-table [ vpn-instance vpn-instance-name ] ip-address1 to ip-address2 [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. Without this option, the command displays routing information for the public
network.
ip-address: Specifies a destination IP address in dotted decimal notation.
mask: Specifies the IP address mask in dotted decimal notation.
mask-length: Specifies the mask length, an integer in the range of 0 to 32.
longer-match: Displays the route entry with the longest mask.
ip-address1 to ip-address2: Specifies a destination IP address range.
verbose: Displays detailed routing table information, including information about both active and
inactive routes. Without this keyword, the command displays brief information about active routes.