140
network-operator
Parameters
level-1: Displays the IS-IS Level-1 GR state.
level-2: Displays the IS-IS Level-2 GR state.
process-id: Specifies a process by its ID in the range of 1 to 65535.
Examples
# Display IS-IS GR state.
<Sysname> display isis graceful-restart status
Restart information for IS-IS(1)
--------------------------------
Restart status: COMPLETE
Restart phase: Finish
Restart t1: 3, count 10; Restart t2: 60; Restart t3: 300
SA Bit: supported
Level-1 restart information
---------------------------
Total number of interfaces: 1
Number of waiting LSPs: 0
Level-2 restart information
---------------------------
Total number of interfaces: 1
Number of waiting LSPs: 0
Table 33 Command output
Field Descri
Restart status
Current GR state:
• RESTARTING—In this state, forwarding can be
ensured.
• STARTING—In this state, forwarding cannot be
ensured.
• COMPLETE—GR is completed.
Restart phase
Current Restart phase:
• LSDB synchronization.
• First SPF computation.
• Redistribution.
• Second SPF computation.
• LSP generation.
• Finish.
Restart t1 T1 timer, in seconds.
count Number of T1 timer expirations.
Restart t2 T2 timer, in seconds.
To Next Page
Loading...
