HP 6125XLG - Page 155

To Next Page

To Previous Page

144

level-2: Displays the level-2 LSDB.

local: Displays LSP information generated locally.

lsp-id lspid: Specifies an LSP ID, in the form of sysID. Pseudo ID-fragment num, where sysID represents the

originating node or pseudo node, and Pseudo ID is separated by a dot from sysID and by a hyphen from

fragment num.

lspname: Specifies the LSP name, in the form of Symbolic name.Pseudo ID-fragment num, where Pseudo

ID is separated by a dot from Symbolic name and by a hyphen from fragment num. If the Pseudo ID is 0,

specify the LSP name in the form Symbolic name-fragment num.

verbose: Displays LSDB detailed information. Without this argument, the command displays brief

information about LSDB.

process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535 to display the LSDB of the IS-IS

process.

Usage guidelines

If no level is specified, the command displays both Level-1 and Level-2 link state databases.

If no IS-IS process ID is specified, the command displays link state databases for all IS-IS processes.

Examples

# Display brief Level-1 LSDB information.

<Sysname> display isis lsdb level-1

Database information for ISIS(1)

--------------------------------

Level-1 Link State Database

---------------------------

LSPID Seq Num Checksum Holdtime Length ATT/P/OL

-------------------------------------------------------------------------------

5555.1111.1111.00-00 0x00000006 0x8519 1150 75 0/0/0

5555.1111.1111.00-01 0x00000001 0x4995 1139 41 0/0/0

7777.8888.1111.00-00* 0x00000020 0xceeb 1159 68 0/0/0

7777.8888.1111.01-00* 0x00000004 0xb4a4 1150 55 0/0/0

*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload

# Display detailed Level-1 LSDB information.

<Sysname> display isis lsdb level-1 verbose