HP 6125XLG - Page 239

228
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters. If no VPN is specified, the command displays dampened BGP IPv6 unicast routes for the
public network.
Usage guidelines
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display dampened BGP IPv6 unicast routes.
<Sysname> display bgp routing-table dampened ipv6
Total number of routes: 1
BGP local router ID is 192.168.1.135
Status codes: * - valid, > - best, d - dampened, h - history,
s - suppressed, S - stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
de Network : 2:: PrefixLen : 64
From : 1::1 Reuse : 00:39:49
Path/Ogn: 100i
Table 58 Command output
Field Description
Status codes
Status codes:
• * – valid—Valid route.
• > – best—Best route.
• d – damped—Dampened route.
• h – history—History route.
• s – suppressed—Suppressed route.
• S – Stale—Stale route.
• i – internal—Internal route.
• e – external—External route.
Origin
Origin of the route:
• i – IGP—Originated in the AS. The origin of summary routes and routes
advertised with the network command is IGP.
• e – EGP—Learned through EGP.
• ?– incomplete—Unknown origin. The origin of routes redistributed from IGP
protocols is INCOMPLETE.
Network Destination network address.
From IP address from which the route was received.
Reuse Reuse time of the route.
Path/Ogn
AS_PATH and ORIGIN attributes of the route:
• AS_PATH attribute—Records the ASs the route has passed to avoid routing
loops.
• ORIGIN attribute—Identifies the origin of the route.