HP 6125XLG - Page 245

234
Table 61 Command output
Field Description
Status codes
Status codes:
• * – valid—Valid route.
• > – best—Best route.
• d – damped—Dampened route.
• h – history—History route.
• s – suppressed—Suppressed route.
• S – Stale—Stale route.
• i – internal—Internal route.
• e – external—External route.
Origin
Origin of the route:
• i – IGP—Originated in the AS. The origin of summary routes and routes
advertised with the network command is IGP.
• e – EGP—Learned through EGP.
• ?– incomplete—Unknown origin. The origin of routes redistributed from IGP
protocols is INCOMPLETE.
Network Destination network address.
NextHop Next hop IP address.
MED MULTI_EXIT_DISC attribute.
LocPrf Local preference value.
PrefVal Preferred value of the route.
Path/Ogn
AS_PATH and ORIGIN attributes of the route:
• AS_PATH—Records the ASs the route has passed to avoid routing loops.
• ORIGIN—Identifies the origin of the route.
# Display detailed information about BGP IPv4 unicast routes destined to network 10.2.1.0/24 for the
public network.
<Sysname> display bgp routing-table ipv4 10.2.1.0 24
BGP local router ID: 192.168.100.1
Local AS number: 100
Paths: 2 available, 1 best
BGP routing table information of 10.2.1.0/24:
Imported route.
Original nexthop: 10.2.1.1
OutLabel : NULL
AS-path : (null)
Origin : igp
Attribute value : MED 0, pref-val 0, pre 0
State : valid, local, best,
From : 10.2.1.2 (192.168.100.2)