HP 6125XLG - Page 373

362
Examples
# Display the neighbor information for OSPFv3 process 1 on an interface.
<Sysname> display ospfv3 1 peer vlan-interface 1
OSPFv3 Process 1 with Router ID 1.1.1.1
Area: 0.0.0.1
-------------------------------------------------------------------------
Router ID Pri State Dead-Time Interface Inst ID
2.2.2.2 1 Init/ - 00:00:36 Vlan1 0
Table 83 Command output
Field Descri
p
tion
Router ID Router ID of a neighbor.
Pri Priority of neighbor router.
State Neighbor state.
Dead Time Dead time remained.
Interface Interface connected to the neighbor.
Inst ID Instance ID.
# Display detailed neighbor information for OSPFv3 process 1 on an interface.
<Sysname> display ospfv3 1 peer vlan-interface 1 verbose
OSPFv3 Process 1 with Router ID 1.1.1.1
Area 0.0.0.1 interface Vlan1's neighbors
Router ID: 2.2.2.2 Address: fe80::200:5eff:fe00:100
State: ExStart Mode: None Priority: 1
DR: 2.2.2.2 BDR: None MTU: 1500
Options is 0x000013 (-|R|-|-|E|V6)
Dead timer due in 00:00:33
Neighbor is up for 00:24:19
Neighbor state change count: 205
Database Summary List 0
Link State Request List 0
Link State Retransmission List 0
Table 84 Command output
Field Descri
p
tion
Router ID Neighbor router ID.
Address Link-local address of the interface.
State Neighbor state.
Mode Neighbor mode for LSDB synchronization.
Priority Neighboring router priority.