HP 6125XLG - Page 375

364
Syntax
display ospfv3 [ process-id ] [ area area-id ] request-queue [ interface-type interface-number ]
[ neighbor-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.
area area-id: Specifies an area by its ID, an IPv4 address or a decimal integer in the range of 0 to
4294967295 that is translated into an IPv4 address by the system.
interface-type interface-number: Specifies an interface by its type and number.
neighbor-id: Specifies a neighbor's router ID.
Usage guidelines
If no OSPFv3 process is specified, this command displays the OSPFv3 request list information for all
OSPFv3 processes.
If no OSPFv3 area is specified, this command displays the OSPFv3 request list information for all areas.
If no interface is specified, this command displays the OSPFv3 request list information for all interfaces.
If no neighbor is specified, this command displays the OSPFv3 request list information for all OSPFv3
neighbors.
Examples
# Display OSPFv3 request list information.
<Sysname> display ospfv3 request-queue
OSPFv3 Process 1 with Router ID 1.1.1.1
Area: 0.0.0.0
Interface Vlan-interface11
-------------------------------------------------------------------------
Nbr-ID 1.3.3.3 Request List
Type LinkState ID AdvRouter SeqNum Age CkSum
0x4005 0.0.34.127 1.3.3.3 0x80000001 0027 0x274d
0x4005 0.0.34.128 1.3.3.3 0x80000001 0027 0x2d45
0x4005 0.0.34.129 1.3.3.3 0x80000001 0027 0x333d
0x4005 0.0.34.130 1.3.3.3 0x80000001 0027 0x3935
Table 86 Command output
Field Descri
p
tion
Area Area ID.
Interface Interface type and sequence number.