HP 6125XLG - Page 38

27
undo ip route-static dest-address { mask | mask-length } [ next-hop-address | interface-type
interface-number [ next-hop-address ] | vpn-instance d-vpn-instance-name next-hop-address ]
[ preference preference-value ]
ip route-static vpn-instance s-vpn-instance-name dest-address { mask | mask-length } { next-hop-address
[ public ] [ bfd control-packet bfd-source ip-address | permanent | track track-entry-number ] |
interface-type interface-number [ next-hop-address ] [ backup-interface interface-type interface-number
[ backup-nexthop backup-nexthop-address ] [ permanent ] | bfd { control-packet | echo-packet } |
permanent ] | vpn-instance d-vpn-instance-name next-hop-address [ bfd control-packet bfd-source
ip-address | permanent | tr
ack track-entry-number ] } [ preference preference-value ] [ tag tag-value ]
[ description description-text ]
undo ip route-static vpn-instance s-vpn-instance-name dest-address { mask | mask-length }
[ next-hop-address [ public ] | interface-type interface-number [ next-hop-address ] | vpn-instance
d-vpn-instance-name next-hop-address ] [ preference preference-value ]
Default
No static route is configured.
Views
System view
Predefined user roles
network-admin
Parameters
vpn-instance s-vpn-instance-name: Specifies a source MPLS L3VPN instance by its name, a case-sensitive
string of 1 to 31 characters. Each VPN has its own routing table, and the configured static route is
installed in the routing tables of the specified VPNs.
dest-address: Specifies the destination IP address of the static route, in dotted decimal notation.
mask: Specifies the mask of the IP address, in dotted decimal notation.
mask-length: Specifies the mask length in the range of 0 to 32.
vpn-instance d-vpn-instance-name: Specifies a destination MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If a destination VPN is specified, packets will search for the
output interface in the destination VPN based on the configured next hop address.
next-hop-address: Specifies the IP address of the next hop, in dotted decimal notation.
backup-interface interface-type interface-number: Specifies a backup output interface by its type and
number. If the backup output interface is an NBMA interface or broadcast interface (such as a VLAN
interface), rather than a P2P interface, you must specify the backup next hop address.
backup-nexthop backup-nexthop-address: Specifies a backup next hop address.
bfd: Enables BFD to detect reachability of the static route's next hop. When the next hop is unreachable,
the system immediately switches to the backup route.
control-packet: Specifies the BFD control mode.
bfd-source ip-address: Specifies the source IP address of BFD packets. HP recommends that you specify
the loopback interface address.
permanent: Specifies the route as a permanent static route. If the output interface is down, the permanent
static route is still active.