435
Parameters
basic-comm-list-num: Specifies a number for the basic community list, in the range of 1 to 99.
basic: Specifies a name for the basic communist list.
advanced: Specifies a name for the advanced communist list.
basic-comm-list-name: Specifies the basic community list name, a case-sensitive string of 1 to 63
characters that cannot comprise only letters.
adv-comm-list-name: Specifies the advanced community list name, a case-sensitive string of 1 to 63
characters that cannot comprise only letters.
adv-comm-list-num: Specifies the advanced community list number in the range of 100 to 199.
regular-expression: Specifies a regular expression for the advanced community list, a string of 1 to 63
characters. For more information about regular expressions, see Fundamentals Configuration Guide.
deny: Specifies the match mode for the community list as deny.
permit: Specifies the match mode for the community list as permit.
community-number&<1-32>: Specifies a community sequence number in the range of 1 to 4294967295.
&<1-32> indicates that the argument before it can be entered up to 32 times.
aa:nn&<1-32>: Specifies a community number. Both aa and nn are in the range of 0 to 65535. &<1-32>
indicates that the argument before it can be entered up to 32 times.
internet: Specifies the INTERNET community attribute. Routes with this attribute can be advertised to all
BGP peers. By default, all routes have this attribute.
no-advertise: Specifies the NO_ADVERTISE community attribute. Routes with this attribute cannot be
advertised to other BGP peers.
no-export: Specifies the NO_EXPORT community attribute. Routes with this attribute cannot be
advertised out of the local AS or the local confederation but can be advertised to other ASs in the
confederation.
no-export-subconfed: Specifies the NO_EXPORT_SUBCONFED community attribute. Routes with this
attribute cannot be advertised out of the local AS, or to other sub-ASs in the local confederation.
Examples
# Configure basic community list 1 to permit routing information with the INTERNET community attribute.
<Sysname> system-view
[Sysname] ip community-list 1 permit internet
# Configure advanced community list 100 to permit routing information with the COMMUNITY attribute
starting with 10.
<Sysname> system-view
[Sysname] ip community-list 100 permit ^10
Related commands
• apply comm-list delete
• apply community
• display ip community-list
• if-match community
To Next Page
Loading...
