79
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process ID in the range of 1 to 65535.
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays the OSPF information for all interfaces.
Usage guidelines
If no OSPF process is specified, this command displays the OSPF interface information for all OSPF
processes.
If you do not provide the interface or the verbose keyword, this command displays OSPF brief
information for all interfaces.
Examples
# Display all OSPF interface brief information.
<Sysname> display ospf interface
OSPF Process 1 with Router ID 192.168.1.1
Interfaces
Area: 0.0.0.0
IP Address Type State Cost Pri DR BDR
192.168.1.1 PTP P-2-P 1562 1 0.0.0.0 0.0.0.0
Area: 0.0.0.1
IP Address Type State Cost Pri DR BDR
172.16.0.1 Broadcast DR 1 1 172.16.0.1 0.0.0.0
Table 19 Command output
Field Descri
Area Area ID of the interface.
IP address Interface IP address (regardless of whether TE is enabled or not).
Type Interface network type: PTP, PTMP, Broadcast, or NBMA.
To Next Page
Loading...
