HP 83480A User Manual

The General Function Menus
Disk Menu
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
TDR/TDT cals HP 54750A only
The HP 54750A mainframe has an additional menu selection, TDR/TDT cals,
which allows previously stored normalization and reference plane calibration
factors to be loaded for the HP 54653A, 54754 TDR plug-in modules. These
calibration factors depend on the following TDR plug-in module conditions:
 The TDR plug-in module must be in the same mainframe slot it was when
used to established the stored normalization and reference plane calibration
factors.
 The TDR plug-in module must be the same one used to establish the stored
normalization and reference plane calibration factors.

The
time
base
values
must
be
set
to
the
same
values
used
when
the
stored
normalization and
reference plane
calibration factors
were established.
Because
the
normalization and
reference plane
calibration
factors
depend
on
the
timebase settings
,the
mainframe
setup
should
be
saved
at
the
same
time
the
TDR/TDT
calibration
factors are
saved.
N
OT
E
Refer
to
\
N
N
NN
NN
N
N
N
N
N
N
N
N
Type
",
later
in
this
chapter
, for
more information
on
le
types.
Refer
to
\Setup
Print
Menu",
later
in
this
chapter
,
for
more
information
on
the
TIFF
,
GIF
,
and PCX
le formats.
11-7

HP 83480A Specifications

General

Brand	HP
Model	83480A
Category	Measuring Instruments
Language	English