HP 83480A User Manual

The General Function Menus
Disk Menu
Text Verbose denitions Type Type describes how the waveform was acquired: raw,
average, or versus. When this eld is read back into the
instrument, all the modes, except versus, are converted to
raw. The default value is raw.
Points Points indicates the number of data points contained in the
waveform record. The number of points is set by the Record
Length softkey in the Acquisition menu. The default value is
calculated.
Count Count represents the minimum number of hits at each time
bucket in the waveform record when the waveform was
created
using
an
ensemble
acquisition
mode
,
like
averaging.
F
or
example
,
when
averaging,
a
count
of
four
would
mean
every waveform
data point
in the
waveform record
has
been
averaged
at
least four
times.
Count
is
ignored
when
it
is
read
back
into the
instrument. The
default
value
is
1.
XInc
X
increment
is
the time
duration
between
data
points
on
the
X-axis
.
X
increment
is equal
to
the
YData
range
value
for
versus
waveforms
.
The
default
value
is
calculated.
XOrg
X
origin
is
the
x-value
of
the
rst
data
point
in
the data
record.
X
origin
is
equal
to
the
YData
center
value
for
versus
waveforms
.
The
default
value
is
22E-9.
XRef
X
reference
is
always
set
to
zero
when
it
is
read
back
into
the
instrument.
The
default
value
is
0.
YData
range
Y
data
range
is
the
full
voltage
range
covered
by
the
A/D
converter. If this eld is omitted, it is calculated when read
back into the instrument. The default value is calculated.
YData center YData center is voltage level at the center of the YData
range. If this eld is omitted, it is calculated when read back
into the
instrument. The default value is 0, but value is
calculated.
Coupling
Coupling
is
ignored
when
it
is
read
back into
the
instrument.
The default value is dc 50.
XRange XRange is the time duration across 10 horizontal divisions of
the display
. The default value is 1.00000E-001.
XOset XOset is the time at the left edge of the display
. The
default value is 22E-9.
11-17

HP 83480A Specifications

General

Brand	HP
Model	83480A
Category	Measuring Instruments
Language	English