HP 8360 B Series User Manual

ALC BW Menu
ALC Bandwidth
Select Low
Function Group
ALC
Menu Map 1
Description
This softkey sets the swept signal generator to the ALC low
bandwidth position (10 kHz).
In this mode, the ALC bandwidth operates in a narrow bandwidth
for all sweep and modulation conditions. An asterisk next to the key
label indicates that this feature is active.
Programming Codes
SCPI: Sending the swept signal generator an ALC bandwidth
frequency value of 210 kHz causes it to select the low ALC
bandwidth mode.
POWer:ALC:BANDwidth:AUTO OFF]0
POWer:ALC:BANDwidth <freq>[freq suffix] or
MAXimumlMINimum
Analyzer: NONE
See Also
(ALC), ALC BW Menu
“Optimizing Swept Signal Generator Performance” in Chapter 1
ALC BW Menu
Function Group
ALC
Menu Map 1
Description
This softkey reveals the softkeys of the ALC bandwidth select menu.
ALC Bandwidth Select Auto
ALC Bandwidth Select High
Sets the ALC bandwidth to be
automatically chosen by the swept
signal generator, depending on the
current sweep and modulation
conditions.
Sets the ALC bandwidth to the
high bandwidth position (100 kHz),
and to remain there for all sweep
and modulation conditions.
Operating and Programming Reference
A-l 1

HP 8360 B Series Specifications

General

Brand	HP
Model	8360 B Series
Category	Portable Generator
Language	English