HP 8360 B Series User Manual

Auto Fill Start
Function Group
FREQUENCY, POWER
Menu Map 2,s
Description
This softkey is used in two locations: Fltness Menu and
List Menu. The operation is the same in both applications.
This softkey enables the entry of a start frequency used to determine
the beginning frequency of the automatic filling array. The array
is not created until either the increment value or the number of
points is assigned. The auto fill start frequency does not affect the
swept signal generator start frequency. When Auto Fill Start is
selected, the active entry area indicates:
--> Fill Start: XXXXXXXXX MHz
where X represents a numeric value. Unless a previous entry was
made, the display indicates the swept signal generator minimum
frequency.
Programming Codes
SCPI: NONE,see Fltness Menu or List Menu
Analyzer: NONE
See Also
Fltness Menu, List Menu
“Optimizing Swept Signal Generator Performance” in Chapter 1
A-26 Operating and Programming Reference

HP 8360 B Series Specifications

General

Brand	HP
Model	8360 B Series
Category	Portable Generator
Language	English