E
8360
Adrs
Function Group
Menu Map
Description
Programming Codes
See Also
SYSTEM
8
This
softkey
lets you change the HP-IB address of the swept signal
generator. Enter the address desired using the numeric entry keys
or the up/down arrow keys. The address value may be set between
0 and 30. The swept signal generator stores the address value
in non-volatile memory. The default address of the swept signal
generator is 19.
SCPI:
SYSTem:COMMunicate:GPIB:ADDRess
Analyzer: NONE
Connectors,
HP-IB Menu
“Instrument Addresses” in Chapter 1
“Programming Typical Measurements” in Chapter 1
Operating and Programming Reference E-l
To Next Page
Loading...
