HP 8360 B Series User Manual

Security Menu
Function Group
SYSTEM
Menu Map 8
Description
This softkey accesses the security function softkeys.
Blank Display
Clear Memory
Save Lock
Zero Freq
Turns off the swept signal generator’s data display,
active entry, and message line areas.
Writes alternating ones and zeros over all swept
signal generator state functions and save/recall
registers a selectable number of times, then returns
the swept signal generator to the factory-preset
state of operation.
Disables the save function.
Displays zeros for all accessible frequency
information.
The features listed above together with the softkeys Freq Offset
and Freq Mult provide the swept signal generator with security
controls for a variety of situations. The local lockout (LLO)
programming command adds security when the swept signal
generator is used in an ATE environment. A security calibration
constant that can be accessed through the service adjustment
menu (requires a password for access) is available also. Refer to
the HP 8360 B-Series Swept Signal Generator/HP 8360 L-Series
Swept CW Generator Service Guide for information on calibration
constants.
See Also
Softkeys listed above.
“Using the Security Features” in Chapter 1
S-58 Operating and Programming Reference

HP 8360 B Series Specifications

General

Brand	HP
Model	8360 B Series
Category	Portable Generator
Language	English