About this guide
This guide provides information about:
• Setting up and configuring the HP StorageWorks DC SAN Backbone Director Switch (DC SAN
Director) and the HP StorageWorks DC04 SAN Backbone Director Switch (DC04 SAN Director)
• Maintaining and operating the products
• Installing FRUs
• Installing the optional blades
• Diagnostics and troubleshooting
• Technical specifications
• Regulatory compliance and safety notices
Intended audience
This guide is intended for system administrators and technicians with knowledge of:
• Storage area networks (SANs)
• HP StorageWorks Fibre Channel enterprise class switches (Directors)
Related documentation
The following documents [and websites] provide related information:
• HP StorageWorks Fabric OS 6.2.x release notes
• HP StorageWorks Fabric OS 6.2.x administrator guide
You can find these documents from the Manuals page of the HP Business Support Center website:
http://www.hp.com/support/manuals
In the Storage section, click Storage Networking. Then click HP StorageWorks DC SAN Director to
access the Manuals web page.
HP StorageWorks DC and DC04 SAN Backbone Director Switches 15
To Next Page
Loading...
Need help?
General
