Plug styleCountry
IEC-60309
32A-6h, 230
V~
AS 3112
Aus-
tralia/New
Zealand
BS-1363A
United King-
dom/ Hong
Kong
CEE-7/7
“Schuko”
Continental
Europe/Ire-
land
NEMA L6-20
USA, Canada,
Mexico, other
North Americ-
an locations
XVenezuela
XYugoslavia
Power cords (Japan, Denan)
Environmental requirements
Table 50 lists the environmental operating ranges for the DC SAN Director. Table 51 lists the
environmental operating ranges for the DC04 SAN Director. The requirements for non-operating
conditions are also provided for acceptable storage and transportation environments.
Table 50 DC SAN Director environmental requirements
Acceptable range during non-oper-
ation
Acceptable range during operationCondition
-40° to +70° C outside switch (-40° to
158° F)
10° to 40° C outside switch (50° to 104° F)
Ambient temperat-
ure
10% to 93% RH noncondensing, at 70°
Celsius
20% to 85% RH noncondensing, at 40°
Celsius, with maximum gradient of 10% per
hour
Humidity
0 to 12 km (40,000 ft.) above sea levelUp to 3 km (10,000 ft.) above sea levelAltitude
33G, 11ms duration, half-sine wave20G, 11ms duration, half-sine waveShock
HP StorageWorks DC and DC04 SAN Backbone Director Switches 219
To Next Page
Loading...
Need help?
General
