5 UID LED/button Solid blue = Activated
Flashing blue = Firmware upgrade in progress
Off = Deactivated
6 Health LED Solid green = Normal
Solid amber = No power present
Flashing amber = Module degraded
Solid red = A physical alignment error exists.
7 Link/Activity mode LED Solid green = Link/Activity mode is selected.
8 PID mode LED Solid green = PID mode is selected.
9 Ethernet mode LED Solid green = Ethernet mode is selected.
10 Fibre Channel (FC) mode
LED
Solid green = FC mode is selected.
ItemItem DescriptionDescription StatusStatus
See OneView (http://www.hpe.com/info/oneview/docshttp://www.hpe.com/info/oneview/docs)
Remove and then reinstall the module.
When illuminated, QSFP+ port LEDs indicate the port operating states for each of the uplink ports in the selected mode.
2
3
3
3
3
1
2
3
To Next Page
Loading...
