HP MSR Router Series User Manual

117
Ste
p
Command Remarks
6. (Optional.) Exclude the LLC
information element from the
outgoing SETUP message.
isdn ignore llc
By default, all ISDN protocols except
5ESS and QSIG include the LLC
information element in the SETUP
message.
The lower layer compatibility (LLC)
element provides low layer
compatibility check information for
the called party. The called party will
reject the call setup request if it
detects an incompatibility.
7. (Optional.) Exclude or
ignore the sending complete
indication for call setup.
isdn ignore sending-complete
[ incoming | outgoing ]
By default:
• The device checks incoming
SETUP messages for the sending
complete indication.
• The device includes a sending
complete indication in outgoing
SETUP messages.
8. Set the value of an ISDN L3
timer.
isdn l3-timer timer-name
time-interval
The default ISDN L3 timer values vary
by ISDN protocol. For the default
timer values, use the display isdn
parameters command.
9. Set the number type and
numbering plan
identification for calling
numbers or called numbers.
isdn number-property
number-property [ calling |
called ] [ in | out ]
By default, the system automatically
selects a number type and numbering
plan appropriate to the upper-layer
service.
10. Enable overlap sending for
called numbers.
isdn overlap-sending [ digits ]
By default, en-bloc sending is
enabled for called numbers. In the
SETUP message, ISDN includes all
information required by the network
to process the call.
If overlap sending is enabled, called
number information is absent or
incomplete in the outgoing SETUP
message.
11. Configure ISDN to include
the calling-name field in
outgoing packets.
isdn carry calling-name
By default, ISDN does not include the
calling-name field in outgoing
packets.
12. Configure ISDN to include
the connected-name field in
outgoing packets.
isdn carry connected-name
By default, ISDN does not include the
connected-name field in outgoing
packets.
13. Configure the ISDN interface
to interpret the PROGRESS
message as the ALERTING
message.
isdn progress-to-alerting enable By default, this function is disabled.
14. Set the progress description
in the progress indicator
information element of ISDN
signaling messages.
isdn progress-indicator indicator
By default, ISDN uses the progress
description assigned by the
upper-layer voice service.

HP MSR Router Series Specifications

General

Brand	HP
Model	MSR Router Series
Category	Network Router
Language	English